Sharpening Kits, Rods, Blocks & Stones
Showing 61–90 of 95 results
-
Pocket Vulkanus – Knife Sharpener MSPB04BL
$26.95Ideal for private households, fishermen and hunters, whether it be smooth or serrated edge knives. With the volcano, you sharpen all the knives in record time. The patented spring tightening system always provides good support and makes handling easy and safe. Stable and robust – Maintenance facility – Sharpening and removal in one pass – Sharp blade – Easy and safe handling – Volcanic knife sharpener – Who does not know that – Knives dull in the kitchen drawer – The meat is more torn than cut and nothing can remedy you easily and without much effort. This newly developed knife sharpener offers for the first time the possibility of giving both smooth and serrated knives a edge like a razor in a state while sharpening and sharpening with a device. There is no need to conduct a course and not have prior knowledge.
The patented spring tightening system always provides good support and makes handling easy and safe. Sharpen the knife with the tip down, without pressure. A decrease in the material of the blade is audible and visible by the fall of metal shavings. Sharpening should only be done when necessary to obtain the basic sharpness and align the blade. Pull the knife with the tip up, without pressure. For daily withdrawal in the professional and private sector. Always slide knives with a notched blade with a horizontal blade. Press lightly on the side where the tree is located. Over time, a wave can appear on both sides, which further increases sharpness.
Product dimensions ( L x l x h ): 16.2 x 3.2 x 8.8 cm; 59 grams. Material: Corindon.
-
Polishing Buffing Compound, Leather Strop Sharpening Stropping Compound Green 8 Oz (222g) Fine 209H
$16.00Sharpal
This fine chromium oxide green compound in a wax bar is fast and effective for polishing to a mirror finish on your tools including aluminum, stainless, steel, brass, cast-iron, copper material & much more. The waxy consistency makes it easy to apply the compound. It is commonly applied to leather, wood or synthetic strops, buffing wheel, etc. A 8 Oz. bar goes a long way, providing years of use.
-
Redi-Edge Dog Tag Knife Sharpener with Black Anodized Aluminum Body MR81009
$29.003″ x 1 3/4″ x 1/4″. Black aluminum body with Duromite cutter sharpening inserts. Hardened ceramic surface is chemically bonded to the body. Side of sharpener has “V” groove for sharpening fish hooks, broad heads and other pointed objects. Black nylon slip pouch. Easy to use. Conveniently fits in pocket. Designed for everyday use. Rust resistant. Hang packaged. Made in the USA.
-
Replacement Belt Kit X4 Fine 3000 Grit for WSKTS-KO Ken Onion Edition, 5 Pack WSSA081120
$27.00Work Sharp Tools
Kit includes (5) X4 Fine Grit Norton Nora 4 Micron Belts (P3000 equivalent). Belts are 3/4″ x 12″ and ONLY fit the Ken Onion Edition Sharpener and Tool Grinding Attachment. These premium grade, engineered abrasives are long lasting and designed for knife & tool sharpening and grinding applications. Does not fit WSKTS.
-
Replacement Belt Kit Extra Coarse for WSKTS-KO Ken Onion Edition, 5 Pack P120 WSSA081117
$27.00Work Sharp Tools
Contains P120 Extra Coarse Grit Norton Ceramic Belts. Intended for light shaping and sharpening applications. Produces a toothy cutting edge for long life utility applications. Made in USA.
-
Replacement Belt Kit Fine 6000 Grit, 6 Pack WSSA0002705
$26.00Work Sharp Tools
Contains six 6000 abrasive belts for the Original and Ken Onion Edition Knife & Tool Sharpeners (belts measure ½” x 12″). Intended for honing applications. Similar to honing with a leather strop. Extremely fine edge for razor quality shave. Highly conformable to hone gut hooks and serrated edges. Very cool cutting for the most delicate blades such as razors and scalpels.
-
Replacement Belt Kit for the Ken Onion Blade Grinding Attachment WSSAKO81115
$34.00Work Sharp Tools
Replacement abrasive belt kit for the Work Sharp Knife & Tool Sharpener Ken Onion Edition (WSKTS-KO) Blade Grinder Attachment. Kit includes: (1) P120 extra coarse grit Norton ceramic, (1) X65 coarse grit Norton Norax 65 micron belt, equivalent to P220 (1) X22 medium grit Norton Norax 22 micron belt, equivalent to P1000, (1) X4 fine grit Norton Norax 4 micron belt, equivalent to P3000 and (1) 12,000 extra fine grit micro-mesh belt . Belts are 1 In. x 18 In. and only fit the Ken Onion Edition Blade Grinder Attachment and WS3000 belt sharpening system attachment. Not for use on the WSKTS or base model WSKTS-KO. These premium grade, engineered abrasives are long lasting and designed for knife & tool grinding, sharpening and honing applications.
-
Replacement Belt Kit Medium P220, 6 Pack WSSA0002704
$26.00Work Sharp Tools
Contains six P220 abrasive belts for the WSKTS. Intended for light shaping and sharpening applications. Produces a toothy cutting edge for long life utility applications. Made in USA.
-
Replacement Belt Kit P80 Coarse, 6 Pack WSSA0002703
$26.00Work Sharp Tools
Contains 6 P80 abrasive belts for the WSKTS. Intended for coarse shaping and tool sharpening applications. Use caution to avoid heat on thin blades near the tip. Use to change bevel angle, shape blade or repair chips. Great for light duty deburring and rust/paint removal. Made in the USA.
-
Serrated Knife Sharpener & Curved Knife Blade Stone ASCG
$19.95DMT
For professional sharpening results, regardless of skill, depend on DMT® Aligner™ Kits and Accessories. Aligner™ Serrated Knife Sharpener in Fine diamond (25 micron / 600 mesh) for a razor sharp serrated edge with the Aligner™ Curved Knife Blade Stone Accessory also in Fine diamond. Convex stone to sharpen popular curved edges. Easy-to-follow instructions included. Sharpening with diamonds is fast and easy. No messy oils needed—sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service For proper tool maintenance, woodworkers, chefs and other professionals rely on the superior quality and versatility of DMT® products. Made in USA.
Features- New serrated sharpener accessory and curved knife blade stone accessory
- Fine diamond for a razor sharp edge
- Sharpens knives faster than conventional stones with DMT®’s monocrystalline diamond surface
- No oil is needed-sharpen dry or with water
- Durable construction will provide years of consistent performance and reliable service.
-
Sharpening Hone Medium Grit S0280
$15.00The Medium Grit Sharpening Hone is ideal for smoothing out deep scratches from hard blade use or from an extra-coarse/coarse abrasive hone. This sharpening hone is designed to be used with Lansky sharpening system.
Uniquely color coded, finger grooved, hone holder is designed for comfortable and slip resistant use. Used for keeping a fine sharp edge. The Medium Hone works best in conjunction with coarse hone and fine grit hone. The medium hone is included in every Sharpening System excluding the the Diamond and Arkansas series. The medium grit is ideal for smoothing out deep scratches from hard blade use or from an extra-coarse/coarse abrasive hone.
Made in the USA!
-
Sharpening Pocket Stone with Sheath – Medium 303M
$49.00Spyderco
Spyderco’s medium-grit (brown) ceramic pocket stone is compact, lightweight, and ideal for touching up edges in the field. It comes with a protective suede carry case that doubles as a non-slip base during use. The perfect addition to a pack, survival kit, or bug-out bag, it only adds a few ounces of weight to your load and it is easily cleaned with household cleanser, a scouring pad, and water.
It is 12.70 x 2.54 x 0.33 cm and made of well-crafted Brown High Alumina Ceramic. This lightweight Spyderco Pocket Stone can be used dry and is easily cleaned.
Made in USA.
-
Sharpening Rod 10″ Diamond Steel, Fine DS0F
$89.00DMT
The 10-in. Diamond Steel™ boasts a fast honing diamond surface with the realigning function and convenience of traditional butcher’s steel. To compliment the 10″ x .375″ (304 mm x 10 mm) diamond sharpening rod, a sanitary black plastic handle with a large guard and color coded ring provide easy grit identification, storage, and safety. Equipped with fine diamond (25 micron / 600 mesh), this Steel in particular is specialized for honing a razor sharp edge. Thanks to the rod’s micronized monocrystalline diamond surface as well, you can sharpen edges faster and easier than conventional Steels can. No messy oils are needed either, allowing you to sharpen dry or with water. Complete with a durable construction will provide years of consistent performance and reliable service, professionals rely on the superior quality and versatility of DMT® products for proper tool maintenance. Made in the USA.
- Sanitary plastic handle with large guard for safety
- Color coded ring for easy grit identification and storage
- Fine diamond for honing a razor sharp edge
- Sharpens knives faster than conventional Steels with DMT’s micronized monocrystalline diamond surface
- No oil needed, sharpen dry or with water.
-
Sharpening Steel 9″ (23 cm) 4463-23
$49.00Wüsthof
WÜSTHOF precision forged knives are goods of only the highest quality. Painstakingly manufactured these knives are pure fun to work with and will turn even the preparation of a dish into a culinary pleasure.
Knives entirely made of only the best stainless steel. Sophisticated design is timeless.
Keeping knives sharp is easy if you sharpen them often on a WÜSTHOF sharpening steel.
-
Signal Diamond Sharpener 935000
$8.00Replacement diamond-coated sharpener for the Signal. It coated with premium synthetic diamond particles and can be used to sharpen hard steel blades. More precise than wood/metal files.
Material Alloy Steel.
Item weight 0.01 kg.
-
Soft-Grip Knife Clamp for Lansky Sharpening Systems RCLAMP
$28.00Lansky
The dual thumbscrew Soft-Grip Clamp was designed specifically for those looking for an easier to use clamp, that would also prevent scratching on coated or highly polished blades. Not for use on blades 1/2″ wide or less. Can hold almost any blade up to 7″ long.
For sharpening blades 1/2″ wide or less (such as tiny swiss army-type blades), use the Standard Knife Clamp.
Made in China.
Instructions
USING YOUR SOFT-GRIP KNIFE CLAMPLoosen the front red thumbscrew screw 2-3 turns. Tighten the back red thumb screw until it is approximately one full turn from being fully tightened. Loosen the front red thumbscrew of the knife clamp again to accommodate thickness of blade. Attach the clamp to the spine of the knife blade at the center of the blade. Approximately ½ inch of the blade should extend from the end of the clamp. Tighten the front screw again to hold the knife securely. Lock the blade in place by hand tightening the back red thumb screw on the clamp.
-
Standard Coarse Sharpening System with Fine Hones LKC03
$60.00Lansky
The Lansky® Controlled-Angle Sharpening System is a guided knife sharpening system that ensures your knife gets sharpened to the exact bevel you specify every time. This system is designed to give your blade a professional, razor-sharp edge regardless of your sharpening ability. Excellent for beginners and advanced users alike. The original and legendary Controlled-Angle System is the ultimate in Knife Sharpening technology.
The Standard Knife Clamp included in the system holds the knife steady, and holds the angle guide static and firm, so that the user can achieve the desired angle with every stroke of the sharpener. The Coarse to Fine hones provide a good range of grits for edge care and maintenance. The Lansky® system is perfect for outdoor sporting, kitchen or workshop knives, and offers the widest range of accessories available. In production for over 45 years, the Lansky® Sharpening System has been the most preferred, and best sharpening system for DIY and cutlery enthusiasts worldwide.
The Lansky® Controlled-Angle Sharpening System allows the user to select the sharpening angles that are best suited for their knife’s intended use.
The four sharpening angles and their uses are listed below:
17° Angle – A severe angle recommended for razor blades, fillet knives or similar tools. An extremely sharp but delicate edge.
20° Angle – A commonly used angle for higher quality blades and provides an excellent edge for kitchen cutlery and slicing knives.
25° Angle – The recommended angle for most knives that need a durable, sharp edge. Ideal for hunting and outdoor knives.
30° Angle – An outstanding angle for knives that cut cardboard, rope or carpets. Best for heavy duty use.Features Honing Oil, Storage Case.
Grit Coarse (120), Medium (280), Fine (600).
Sharpener Angle 17°, 20°, 25°, 30°.
Sharpener Material Alumina Oxide.
Uses Regular, Filet, Kitchen Blade.
Made in China.
-
Stropping Belt Kit for Blade Grinding Attachment WSSAKO81121
$46.00Work Sharp Tools
This set of two cloth strop belts and two compounds is designed to fit the Blade Grinding Attachment for the Ken Onion sharpener. Cloth belts are used for final stropping and are superior to leather in performance.
Abrasive belts for the Blade Grinding Attachment are formulated, designed, and made in America by industry-leading abrasives manufacturer Norton for precision sharpening of high-strength steels. The grit symmetry, spacing, and backing flexibility are all designed to produce the optimal convex edge with minimal heating or material takeoff. If you’ve ever used a belt sander to sharpen, you know how quickly the steel heats and how much excess material can be removed if you aren’t careful. Our abrasives are a key component of our success in the sharpening world.
-
Tri-Angle Sharpening Stone Fine Teardrop Shape 400F1SP
$24.00pyderco
Spyderco’s ceramic files are specifically designed for sharpening small, detailed tools like woodcarving tools, gouges, and dental devices. They are also used by gunsmiths for trigger jobs, deburring, and detail finishing. This slip (teardrop-shaped) file is ideal for sharpening small tools and serrated edges. Easily cleaned with household cleanser, a scouring pad, and water.
Made in the USA.
Sold individually.
-
Tri-Angle Sharpmaker Diamond Sharpener – Set of 2 (Diamond Coarse) 204D
$96.00Spyderco
These accessory diamond-impregnated steel triangles fit your Tri-Angle Sharpmaker base and are ideal for re-profiling edges, putting edges on exceptionally dull knives, and sharpening ultra-hard blade steels.
Sold as a pair. 7” X 0.5” (178mm X 13mm).
-
Triangle Sharpmaker – Complete Sharpening System – 204MF
$138.00Spyderco
The key to sharpening any cutting tool is removing the steel at the edge while maintaining a consistent angle between the blade and the stone. Spyderco’s Tri-Angle Sharpmaker takes the mystery out of this process. It enables anyone to sharpen a knife effectively with just a few minutes practice.
Its durable ABS plastic base contains keyed holes that accurately set the stones’ sharpening angles at a 30° (15° each side) or 40° (20° each side) for sharpening knives. Simply keep the plane of your knife’s blade vertical and draw the edge along each stone to sharpen. It’s that simple. For serrated blades, use the rounded edges of the stones and a slightly looser grip to allow the stone to flow into the recesses of each serration.
The Sharpmaker system includes two sets of high alumina ceramic stones:
1. a pair of medium-grit (brown) stones for aggressive sharpening
2. and a set of fine (white) stones for professional-grade finishing.A set of aluminum safety rods protect your hands while sharpening. All components snap into the self-contained ABS plastic base and lid for easy storage. Every Sharpmaker comes complete with a detailed instruction book and DVD. That guides you step by step through the process of sharpening knives, scissors, awls, and many other tools.
-
Triangle Sharpmaker Rods 7″ x 0.5″ Medium Grit 204M1
$19.00Spyderco
This medium-grit (brown) stone is a replacement or spare for the original medium-grit stones included with your Tri-Angle Sharpmaker. Designed to be used dry, it is easily cleaned with household cleanser, a scouring pad, and water. Sold individually. Made in USA. 7” X 0.5” (178mm X 13mm).
-
Triangle Sharpmaker Set of 2 Cubic Boron Nitride Rods 204CBN
$96.00Spyderco
Cubic Boron Nitride (CBN) is a superabrasive that is second in hardness only to diamond. It offers greater abrasion resistance and thermal conductivity than conventional abrasives like silicon carbide and aluminum oxide, making it the preferred abrasive in many advanced industrial grinding applications. Now you can combine the advantages of this fast-cutting abrasive with the convenience and ease of use of Spyderco’s Tri-Angle Sharpmaker with these CBN-coated Sharpmaker™ rods.
Sold as a pair. 7” X 0.5” (178mm X 13mm).
Tri-Angle Sharpmaker Sold Separately.
-
Triangle Sharpmaker Ultra Fine Grit Rod 204UF1
$28.00Spyderco
This ultra-fine-grit accessory stone fits the Tri-Angle Sharpmaker base and puts an exceptionally fine scratch pattern on your edge for hair-popping sharpness. Designed to be used dry, it is easily cleaned with household cleanser, a scouring pad, and water.
Sold individually.
Made in USA.
7” X 0.5” (178mm X 13mm) .
-
Two-Sided Hand Sharpener MR326
$9.00Synthetic grinding stone, pocket size. The Marbles Two-Sided Hand Sharpener MR326 features an 800 grit orange side and a 500 grit grey side and measures 2.12″ x .5″. Ideal for sharpening axes.
-
Two-Sided Japanese Whetstone, Coarse 600/1500 Grit W0002
$43.00This Japanese Whetstone provides an easy way to keep your Real Steel knife nice and sharp. It comes with a different grit on each side to maximize the usefulness of a single stone. The stones are made from corundum which is a crystalline form of aluminum oxide that is commonly used in abrasives. These whetstones come with a non-slip silicone base that allows for easy changing of sides without sacrificing stability during sharpening.
- Dimensions: 7.1″ x 2.4″ x 1.2″
- Grits: 600/1500
- Weight: 1.3 lbs.
- Made in China.
-
Two-Sided Japanese Whetstone, Medium 2000/5000 Grit W0205
$43.00This Japanese Whetstone provides an easy way to keep your Real Steel knife nice and sharp. It comes with a different grit on each side to maximize the usefulness of a single stone. The stones are made from corundum which is a crystalline form of aluminum oxide that is commonly used in abrasives. These whetstones come with a non-slip silicone base that allows for easy changing of sides without sacrificing stability during sharpening.
- Dimensions: 7.1″ x 2.4″ x 1.2″
- Grits: 2000/5000
- Weight: 1.3 lbs.
- Made in China.
-
Ultra Tek Diamond Steel Blade Sharpener with 600-Grit Diamond Coated Oval Shaft 2535
$39.00Kershaw Knives
The Ultra-Tek Blade Sharpener is the convenient way to keep your Kershaw sharp. The Ultra-Tek is a compact sharpening steel that lets you quickly and easily touch up the edge on your Kershaw anywhere, anytime. The Ultra-Tek handle is made of 6060-T6 anodized aircraft aluminum.
Stored inside the handle is a 600-grit, diamond-coated oval shaft. This is the perfect grit for restoring an edge that is in generally good shape, but is just dull. Simply unscrew the shaft from the handle interior, turn it around, and screw it on to the other end of the handle. Now the Ultra-Tek is a comfortable 9-in. length, ideal for both sharpening and realigning the edge of your Kershaw blade. To sharpen, hold the blade edge against the diamond-coated shaft at about a 20-degree angle and swipe the blade, from heel to tip, along the sharpening shaft. Do this an even number of times on both sides of the blade. Soon, your blade will be restored to it’s Kershaw shaving sharp edge. It’s a good idea to keep the Ultra-Tek close at hand so you can touch up the blade from time to time. If you don’t let it get terribly dull, it will take no time at all to maintain your edge.
The Ultra-Tek requires no water or oil. It’s lightweight and easy to use. And it stores compactly, making it easy to take with you.
-
Whetstone Sharpening Stone J2000 / J400 Grit 4450
$49.00Tired of sending your valuable knives out for service? Try the WÜSTHOF Ceramic whet stone. With two sides, one can recondition a well used edge with the 400 grit side then fine tune with the 2000 grit side. At 6 inches long by 2 inches wide, this whetstone can accommodate sharpening longer blades.
Before each use, soak in water for 10 minutes to remove any metal dust. Position the stone on a flat surface and keep it stable. For very dull or damaged blades, start with the coarse side first. Using gentle pressure, draw the edge of the blade over the stone at a 15 – 20 angle from the blade base to tip, and repeat this motion for the other side of the blade. Repeat using the other side of the whetstone to hone the edge as desired. Knives that are well maintained may only require fine honing. Utilizing the stone s entire surface while sharpening will make sure the stone wears evenly over time.
The Wüsthof Ceramic Whetstone is suitable for use with oil or water, but please note that once oil has been used, the whetstone can no longer be used with water.
-
Whetstone Sharpening Stone J8000 / J3000 Grit 4452
$109.00A sharpening stone for a particularly gentle way of honing and sharpening your knives. Wusthof Whetstones consist of a combination of different high-quality, abrasive grits. The stones have two sides – one with a fine grit and one coarse. The coarse side is used to smooth off any unevenness while the finer grit is used to hone and sharpen your knife.
Features:
- Made in Germany
- Made from stone
- Features two sides – one with a fine grit, and one coarse
- Coarse side is used to smooth off any unevenness
- Finer grit is used to hone and sharpen your knife.
Dimensions: Approx. 20cm (l) x 3cm (h) x 6cm (w).