Whetstone Sharpening Stone J2000 / J400 Grit 4450
$49.00
Tired of sending your valuable knives out for service? Try the WÜSTHOF Ceramic whet stone. With two sides, one can recondition a well used edge with the 400 grit side then fine tune with the 2000 grit side. At 6 inches long by 2 inches wide, this whetstone can accommodate sharpening longer blades.
Before each use, soak in water for 10 minutes to remove any metal dust. Position the stone on a flat surface and keep it stable. For very dull or damaged blades, start with the coarse side first. Using gentle pressure, draw the edge of the blade over the stone at a 15 – 20 angle from the blade base to tip, and repeat this motion for the other side of the blade. Repeat using the other side of the whetstone to hone the edge as desired. Knives that are well maintained may only require fine honing. Utilizing the stone s entire surface while sharpening will make sure the stone wears evenly over time.
The Wüsthof Ceramic Whetstone is suitable for use with oil or water, but please note that once oil has been used, the whetstone can no longer be used with water.
In stock
Additional information
| Weight | 0.35 kg |
|---|---|
| Dimensions | 15.2 × 5.1 × 3.8 cm |
Related products
-
Bear Grylls Field Sharpener for Fine Edge and Serrated Blades 31-001270
$39.00 Add to cartBear Grylls Field Sharpener for Fine Edge and Serrated Blades 31-001270
Gerber
Encased in a smooth, hard plastic cover the Bear Grylls Knife Sharpener fits easily in your pocket. The handle is made of grippy rubber for secure holding in wet or cold conditions. Two rod shaped diamond-coated sharpeners allow you to sharpen the serrated sections of your knife. Coarse Carbide and Fine Ceramic inserts will get your fine edge blade in shape. Your Survival Series Field Sharpener will likely be the only one you’ll ever need.
Features- Hard Plastic Cover
- Pocket Size
- Grippy Handle
- Sharpens Fine Edge & Serrated Blades
- Priorities of Survival Guide
Specifications
- Overall Length: 4.5″
- Total Weight: 2.3 oz.
- Steel Type: SS416 Grit 400
- Coarse Carbide Insert
- Fine Ceramic Insert
- Made in China.
$39.00 -
Serrated Knife Sharpener & Curved Knife Blade Stone ASCG
$19.95 Add to cartSerrated Knife Sharpener & Curved Knife Blade Stone ASCG
DMT
For professional sharpening results, regardless of skill, depend on DMT® Aligner™ Kits and Accessories. Aligner™ Serrated Knife Sharpener in Fine diamond (25 micron / 600 mesh) for a razor sharp serrated edge with the Aligner™ Curved Knife Blade Stone Accessory also in Fine diamond. Convex stone to sharpen popular curved edges. Easy-to-follow instructions included. Sharpening with diamonds is fast and easy. No messy oils needed—sharpen dry or with water. Durable construction will provide years of consistent performance and reliable service For proper tool maintenance, woodworkers, chefs and other professionals rely on the superior quality and versatility of DMT® products. Made in USA.
Features- New serrated sharpener accessory and curved knife blade stone accessory
- Fine diamond for a razor sharp edge
- Sharpens knives faster than conventional stones with DMT®’s monocrystalline diamond surface
- No oil is needed-sharpen dry or with water
- Durable construction will provide years of consistent performance and reliable service.
$19.95 -
Crystal Saver Multi-Purpose Diamond Sharpener COO
$32.00 Add to cartCrystal Saver Multi-Purpose Diamond Sharpener COO
DMT
The Crystal Saver® is specialized for smoothing chipped edges of fine crystal, china, ceramic, glassware or any hard material to a nearly new state. Equipped with a coarse grit diamond (45 micron / 325 mesh) to quickly restore a chipped edge in just a few strokes, it is also easy to wield with a comfortable 4″ (102 mm) handle. Thanks to its micronized monocrystalline diamond surface as well, you can smooth out rough edges even faster. No messy oils are needed either, allowing you to use the Crystal Saver® dry or with water. Complete with a durable construction that will provide years of consistent performance and reliable service, professionals rely on the superior quality and versatility of DMT® products for proper tool maintenance. Made in the USA.
- Coarse diamond to smooth chipped edges of crystal, china, ceramic, glassware or any hard material
- Compact, lightweight construction
- Half-round coarse diamond file good for all-purpose filing needs
- Micronized monocrystalline diamond surface to smooth rough edges even faster.
$32.00 -
Diamond Sharpening Steel 14 in. 035C
$65.00 Add to cartDiamond Sharpening Steel 14 in. 035C
Fast-sharpening and long-lasting, the AccuSharp® Diamond Sharpening Steel 035C will keep all your household knives properly honed. The durable diamond surface quickly returns the edge of a good blade in around 10 strokes.
The rubber over-molded handle ensures a safe and secure grip, and the collar guard safely keeps hands out of the way.$65.00