ZT Knives
Showing 1–30 of 35 results
-
Assisted Flipper 3.25″ S35VN Stonewash Blade, Carbon Fiber Handle, Liner Lock 0770CF
$348.00Zero Tolerance Knives
The original, award-winning Zero Tolerance 0777 was a very limited-run knife. Yet interest in it is high among blade aficionados. That’s why Zero Tolerance is happy to announce a version of that award-winning knife—one that will be much more generally available. The 0770CF offers the style and performance of the award-winning 0777, but in a slightly smaller, streamlined version.
For ZT performance, the blade is S35VN stainless steel, which provides the ability to take a razor edge, excellent edge retention, strength, and toughness. A stonewashed finish on the blade hides hard-use scratches and makes maintenance easier. The sweeping lines of the original 0777 are preserved in the lightweight carbon-fiber handle that fits securely in the hand. An inset liner lock in titanium secures the blade without adding unnecessary weight.
The 0770CF opens quickly and easily thanks to SpeedSafe assisted opening and the built-in flipper. For a final touch of class, ZT adds a handsome oversized pivot.
Please note: this model was first made with ELMAX blade steel; you may still find some of these blades in the marketplace. All current production is shipping with S35VN.
-
Assisted Flipper Knife 3.25″ CPM-20CV Working Drop Point Blade, Black G10 Handle, Liner Lock 0357
$292.00The 0357 is premium made simple – a working knife built for tough conditions. A 3.25-inch drop point blade gives users plenty of edge for cutting tasks. High-end CPM 20CV blade steel provides reliable edge retention and corrosion resistance. Scratches blend in with the blade’s working finish. Black G10 is machined on both the front and back of the handle. The 0357 features ZT’s assisted opening system. Simply pull back on the flipper to easily open the knife every time. The blade locks into place with a rock-solid liner lock. A reversible deep-carry pocket clip allows for ambidextrous carry in the tip-up position. All of these features are precision built in ZT’s Tualatin, Oregon USA factory. Whether you’re just starting your ZT journey, or are looking to add to your collection, count on the 0357 to get the job done.
Features
- Made in the USA
- Black G10 Handle
- CPM 20CV blade steel offers exceptional hardness, wear resistance, edge retention; stonewashed finish helps hide use scratches
- Assisted opening offers fast, reliable deployment with a flipper.
-
Assisted Liner Lock Flipper Knife 3.25″ CPM-MagnaCut Tiger Stripe Plain Blade, OD Green G10 Handle 0350OLTS
$346.00ZT Knives
Same durable build. Same precision quality. Yet the Zero Tolerance 0350OLTS has something the others don’t: a bold, tiger-stripe blade. While it may look a little wilder, the 0350OLTS has all the same features as our classic 0350. It has a High-performance MagnaCut blade and textured OD Green G10 scales with ZT’s swift and simple opening system so it’s always ready for the next task quickly.
The 0350OLTS is fully equipped with SpeedSafe for one-handed assisted opening. Even in combat gloves, you can easily deploy the blade using the large, ambidextrous thumb studs or flipper tab.
Features
- Made in the USA
- CPM MagnaCut powdered metallurgy blade steel excels in edge retention, corrosion resistance, wear resistance, and toughness; Cerakote blade finish enhances chemical resistance and impact strength
- Textured OD Green G10 handle, contours ensure a steady grip; extra-heavy frame provides a secure blade lock up during use
- Pocketclip mounts tip-up/down and right/left; lanyard hole.
-
Dmitry Sinkevich Factory Special Series Flipper Knife 3.4″ S110V Black DLC Blade, Black DLC Titanium Handle with Copper Insert 0470S110V
$420.00Designed for use, and not relegated to safe queen status, the new ZT – Dmitry Sinkevich collaboration begs to work. It is a highly practical, easy-to-EDC design that handles a wide range of tasks and looks good doing it.
This LIMITED EDITION 0470 features a CPM-S110V blade, given a black DLC (Diamond Like Coating) finish.
The frame lock handle of the 0470S110V is titanium, and is given a complete DLC finish, and set off with a copper insert.
Features
- Flipper
- Black DLC finish
- KVT ball-bearing system
- Hardened steel lockbar insert
- Bent titanium clip.
-
Dmitry Sinkevich Flipper 3.25″ CPM-MagnaCut Stonewashed Drop Point Blade, Blue Carbon Fiber and Titanium Handle, Frame Lock 0450BLUCF
$392.00Zero Tolerance provides a dark, refined alternative to the original 0450 with the 0450BLUCF.
This sophisticated ZT is a smaller option in the ZT family, yet offers a robust combination of durable, premium-quality materials. The blade steel is Magnacut for exceptional toughness, wear resistance, and edge retention. The Magnacut blade is Stonewashed. The front handle scale is blue carbon fiber, balancing the knife’s solid construction with lightweight convenience.
As an extra visual touch, ZT has added two BLUE anodized-aluminum tube spacers that are especially eye-catching, standing out against the black handle. The 0450BLUCF takes advantage of ZT’s KVT ball-bearing system to enable smooth, easy opening for either left- or right-handed users. A left/right reversible, deep-carry pocketclip rounds out the 0452BLUCF’s basic feature set.
While it’s a smaller, more gentlemanly knife, the 0450BLUCF proudly lives up to the overbuilt standards for which ZT is well known.
-
Dmitry Sinkevich Flipper 3.25″ S35VN Black Blade, Carbon Fiber and Titanium Handle, Frame Lock 0450CF
$352.00Zero Tolerance Knives
Zero Tolerance provides a dark, refined alternative to the original 0450 with some extra flair.
This sophisticated ZT is a smaller option in the ZT family, yet offers a robust combination of durable, premium-quality materials. The blade steel is CPM-S35VN for exceptional toughness, wear resistance, and edge retention. The S35VN blade is DLC coated for matte-black good looks and enhanced performance. The front handle scale is carbon fiber, balancing the knife’s solid construction with lightweight convenience. The DLC-coated titanium back handle offers a secure frame lock—so you can always cut with confidence.
As an extra visual touch, ZT has added two emerald-green anodized-aluminum tube spacers that are especially eye-catching, standing out against the black handle. The 0450CF takes advantage of ZT’s KVT ball-bearing system to enable smooth, easy opening for either left or right-handed users. A left/right reversible, deep-carry pocket clip rounds out the 0450CF’s basic feature set.
While it’s a smaller, more gentlemanly knife, the 0450CF proudly lives up to the overbuilt standards for which ZT is well known.
Features
- Jimped flipper tab
- Hardened steel lockbar insert
- Custom green aluminum barrel spacers.
-
Dmitry Sinkevich Flipper Knife 3.25″ CPM-20CV Two-Tone Blade, Stonewashed Titanium Handle, Frame Lock 0460TI
$319.00Zero Tolerance Knives
The 0460 is one of ZT’s most popular knives. Originally, it featured a carbon fiber front scale and titanium back. But this 0460TI is all titanium.
Designed by Dmitry Sinkevich, the 0460TI is based on his Polychotky Jr. Like the original, it has a pronounced ergonomic handle curve that fits neatly into the hollow of the hand. Partial 3D machining on the handle adds dimensionality and enhances grip.
The blade steel is CPM-20CV for toughness and resistance to edge chipping with no loss of wear resistance. Rich in niobium, vanadium, and chromium carbides, it enables a sharp, long-lasting edge. For sharp looks, ZT gives the blade a two-tone finish: stonewashed on the flats and machine satin on the grinds.
The knife opens with ZT’s KVT ball-bearing opening and a flipper. A titanium frame lock with hardened steel lockbar insert secures the blade safely open during use. A matte black anodized aluminum backspacer adds a handsome decorative touch. And finally, the black backspacer is complemented by black hardware and a reversible, black pocket clip.
Features
- KVT ball-bearing system
- Hardened steel lockbar insert
- Bent titanium clip.
-
Dmitry Sinkevich Flipper Knife 3.25″ S35VN Two-Tone Blade, Bronze Carbon Fiber and Titanium Handle, Frame Lock 0460
$329.00Zero Tolerance Knives
The Zero Tolerance 0460, designed by Dmitry Sinkevich, continues to be one of ZT’s top-selling knives. But some knife users have been asking for a little more — a little more size, a little more handle curve, a little more carbon fiber, a little more Sinkevich. ZT’s answer? The 0460.
The blade steel is S35VN for enhanced toughness and resistance to edge chipping with no loss of wear resistance. Rich in niobium, vanadium, and chromium carbides, it enables a sharp, long-lasting edge. For sharp looks, ZT gives the blade a two-tone finish: stonewashed on the flats and satin on the grinds.
Based on Dmity’s Polychotky Jr., the 0460’s carbon-fiber-and-titanium handle has a pronounced ergonomic curve to fit into the hollow of the hand neatly. The front scale is bronze carbon fiber. This relatively recently developed composite material offers the benefits of carbon fiber, but with the ability to colorize the material as well — in the case of the 0460, the color is an attractive bronze. ZT partially 3D machined the front handle for dimensionality and grip as well.
The handle back is titanium with a titanium frame lock and hardened steel lockbar insert. A matte black anodized aluminum backspacer adds a handsome decorative touch while the black Teflon-coated pocket clip lets you carry the ZT comfortably every day.
-
Dmitry Sinkevich Flipper Knife 3.4″ 20CV Two-Tone Blade, Titanium Handle with Carbon Fiber Insert, Frame Lock 0470
$496.00Zero Tolerance Knives
This is not a safe queen. Oh, it’s pretty enough, but it’s built by ZT, so it’s built for function. Designed by Dmitry Sinkevich, the 0470 is a highly practical, easy-to-EDC pocketknife that handles a wide range of tasks. The blade is wear resistant, corrosion resistant CPM 20CV high-chromium stainless steel. The handle is titanium with an eye-catching marbled carbon fiber insert that adds a sophisticated touch to the look of this knife.
- Made in the USA
- CPM 20CV powdered metallurgy tool steel with high volume of vanadium carbides for exceptional wear resistance and long-lasting edge; two-tone, satin-and-stonewashed blade finish
- Titanium handle with marbled carbon fiber insert; instead of a “weave,” carbon fibers are dropped randomly onto the plate, resin secures the fibers and produces a smooth surface
- A mid-sized carry for the weight of a compact thanks to titanium handles.
-
Dmitry Sinkevich Frame Lock Flipper Knife 4.1″ CPM-MagnaCut Stonewashed Drop Point Blade, Blue Carbon Fiber and Titanium Handle 0452BLUCF
$472.00ZT Knives
The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich.
To make this amazing knife more readily available, ZT created the 0452 based on the original’s streamlined form and high-performance function. This special variation features a blue carbon fiber front scale and a blade of CPM-MagnaCut, and stainless steel that has great toughness and edge holding.
-
Emerson Folding Knife 3.75″ CPM-20CV Black Stonewash Blade, Machined Titanium and Black/White Carbon Fiber Handle, Frame Lock 0640WBW
$399.00Zero Tolerance Knives
The 0640WBW is a robust ZT/Ernest Emerson collaboration that provides both utterly practical design and boldly eye-catching style.
The first thing you’ll notice is the handle. The black stonewashed titanium handle features a black and white carbon fiber composite overlay on both sides. In addition to the engaging overlay, the handle also features ridged machining at the top of the handle that follows the handle’s angular contours, front and back. A sturdy frame lock with hardened steel lockbar insert provides a secure lockup. Jimping at top and bottom of the handle enhances grip.
This handsome handle is paired with a 3.75″ clip-point blade of CPM-20CV high-chromium stainless steel. This powdered metallurgy tool steel has a high volume of vanadium carbides for exceptional wear resistance – and a truly long-lasting edge. The highest level of chromium of any high-vanadium steel gives 20CV excellent corrosion resistance as well. The blade has a black stonewashed finish that helps resist normal wear and tear while using the knife.
The 0640WBW is a fully manual knife that opens one-handed with the Emerson thumb disk. A reversible pocket clip makes it easy to carry with you, too. EDC, at work, or outdoors, the 0640 can handle it all.
-
Emerson Manual Folding Knife Carbon Fiber/Titanium 3.75″ Satin Two-Tone Blade 0640
$402.00Zero Tolerance Knives
The 0640 is a robust ZT/Ernest Emerson collaboration that provides both utterly practical design and boldly eye-catching style.
The first thing you’ll notice is the handle. The stonewashed titanium handle features a green carbon fiber composite overlay on both sides. In addition to the engaging green overlay, the handle also features ridged machining at the top of the handle that follows the handle’s angular contours, front and back. A sturdy frame lock with hardened steel lockbar insert provides a secure lockup. Jimping at top and bottom of the handle enhances grip.
This handsome handle is paired with a 3.75″ clip-point blade of CPM-20CV high-chromium stainless steel. This powdered metallurgy tool steel has a high volume of vanadium carbides for exceptional wear resistance—and a truly long-lasting edge. The highest level of chromium of any high-vanadium steel gives 20CV excellent corrosion resistance as well. The blade is machine satin-finished on the grinds and stonewashed on the flats.
The 0640 is a fully manual knife that opens one-handed with the Emerson thumb disk. A reversible pocket clip makes it easy to carry with you, too. EDC, at work, or outdoors, the 0640 can handle it all.
-
Factory Special Series Tim Galyean Flipper Knife 1.8″ CPM-20CV Stonewashed Blade, Copper and Titanium Handle, Frame Lock 0022CU
$260.00Zero Tolerance Knives
Revamped in a new handle material, this Factory Special Series 0022 is available in limited quantities. A copper front handle scale gives the 0022CU a fresh look that will patina over time. Although copper paired with the titanium back handle adds some comfortable heft, this mini ZT is still under three ounces. And like the original, the 1.8-inch CPM 20CV blade is high performance for a multitude of tasks. The copper hue goes well with all-silver hardware, complete with a titanium trim ring that helps make this limited-run ZT a must have.
Features
- Made in the USA; Factory Special Series
- Under 2-inch blade; CPM 20 CV blade steel for superior hardness, corrosion resistance, and edge retention
- Genuine copper front scale will patina over time for a unique finish, titanium back with frame lock for secure blade lockup during use
- Though small, the 0022 is designed for hand comfort with deep finger contours to ensure a good grip
- Silver titanium trim ring around pivot adds visual interest to this mighty mini carry.
-
Fixed Blade Knife 6″ CPM-3V Black Clip Point Blade, Black G10 Handle, Kydex Sheath 0006BLK
$495.00Zero Tolerance Knives
Whether it’s for survival, the great outdoors, or summer projects, the military-inspired 0006BLK is the answer. Though it pays homage to the original ZT-9 with a steel guard, this full-tang beast is not a bayonet. Instead, this versatile ZT fits snugly in a durable Kydex sheath for travel. Named after its 6-inch blade, the 0006BLK uses CPM-3V, a tough tool steel that resists edge chipping during the hardest work tasks. While this non-stainless steel wasn’t designed for corrosion resistance, ZT added a clear Cerakote coating for greater durability. It’s a thick blade at 3/16 inches, but still plenty functional. The rounded profile fills the hand without being too big, and the black G10 handle offers a comfortable grip. Choke up on the aggressive jimping with or without gloves for greater control. When ZT makes a fixed blade, there’s nothing else like it. The 0006BLK is no exception.
- Made-in-the-USA fixed blade with steel guard
- CPM-3V steel provides superior toughness and resists edge chipping
- Black G10 Handle with texturing
- Kydex sheath secondary retention strap for travel; includes webbing slots and drainage hole.
-
Fixed Blade OD Green G10 & CPM-3V Steel Knife ZT 0006
$496.00Zero Tolerance
Whether it’s for survival, the great outdoors, or summer projects, the military inspired 0006 is the answer. Though it pays homage to the original ZT-9 with a steel guard, this full-tang beast is not a bayonet. Instead, this versatile ZT fits snugly in a durable Kydex sheath for travel. Named after its 6-inch blade, the 0006 uses CPM 3V, a tough tool steel that resists edge chipping during the hardest work tasks. While this non-stainless steel wasn’t designed for corrosion resistance, ZT added a clear Cerakote coating for greater durability. It’s a thick blade at 3/16 inches, but still plenty functional. The rounded profile fills the hand without being too big, and an olive G10 handle offers comfortable grip. Choke up on the aggressive jimping with or without gloves for greater control. When ZT makes a fixed blade, there’s nothing else like it. The 0006 is no exception.
- Made-in-the-USA fixed blade with steel guard
- CPM 3V steel provides superior toughness and resists edge chipping; bead-blasted finish with clear Cerakote coating for added durability
- OD Green G10 Handle with texturing
- Kydex sheath with secondary retention strap for travel; includes slots, drainage hole, and can be carried left- or right-handed, high or low carry.
-
Flipper Knife 3.2″ CPM-MagnaCut Stonewashed Drop Point Blade, Blue/Black Carbon Fiber and Titanium Handle, Frame Lock 0545BLUCF
$423.00Zero Tolerance Knives
Carry the 0545 in stylish blue, available in limited quantities at authorized dealers. Its slim profile features a blue carbon fiber front handle for a comfortable and light carry. But the manual KVT folder is also sized appropriately for serious cutting tasks. Even better, the two-tone blade measures at an extra slicey 0.09 inches and uses a full-width flat grind. Its CPM MagnaCut blade steel is balanced with premium edge retention, toughness, and corrosion resistance. This ZT Original is a clean design with no visible pocket clip screws. Yet the minimal deep-carry clip is reversible for left or right carry. As a bonus, the pivot screw is anodized with a matching blue finish. Grab one while they last, because when they sell out at dealers, they’re gone.
- Made in the USA; Factory Special Series
- Premium CPM MagnaCut powdered metallurgy blade steel excels in edge retention, corrosion resistance, wear resistance, and toughness; two-tone blade finish with stonewashed flats and satin grinds
- Blade opens easily and smoothly with KVT ball-bearing system with washers and flipper
- Blue carbon fiber front scale with working finish titanium back; handle finger pocket keeps pressure off frame lock, which helps result in consistent and smooth opening each time
- Reversible extra-deep-carry pocket clip provides a convenient, low profile carry; blue-anodized pivot screw.
-
Flipper Knife 3.2″ CPM-MagnaCut Stonewashed Drop Point Blade, Carbon Fiber and Titanium Handle, Frame Lock 0545
$420.00Zero Tolerance Knives
Work, formal, or anywhere in-between, experience the 0545. Its slim profile and carbon fiber front handle offer a comfortable and light carry. But the manual KVT folder is also sized appropriately for serious cutting tasks. Even better, the blade measures at an extra slicey 0.09 inches and uses a full-width flat grind. Its CPM MagnaCut blade steel is balanced with premium edge retention, toughness, and corrosion resistance. Aesthetically, this ZT Original is a clean design with no visible pocket clip screws. Yet the minimal deep-carry clip is reversible for left or right carry. As a bonus, the pivot screw is anodized with a stylish bronze finish. Whether you’re carrying it in jeans or slacks, the 0545 makes the job easy.
- Made in the USA
- Premium CPM MagnaCut powdered metallurgy blade steel excels in edge retention, corrosion resistance, wear resistance, and toughness; stonewashed finish helps hide use scratches
- Blade opens easily and smoothly with KVT ball-bearing system with washers and flipper
- Carbon fiber front scale with working finish titanium back; handle finger pocket keeps pressure off frame lock, which helps result in consistent and smooth opening each time
- Reversible extra-deep-carry pocket clip provides a convenient, low profile carry; bronze-anodized pivot screw.
-
Flipper Knife 3.75″ CPM-20CV Tiger Stripe Blade, Black G10 and Titanium Handle, Frame Lock 0308BLKTS
$580.00Zero Tolerance Knives
For the first time ever, ZT is using a black-oxide BlackWash finish with its classic tiger stripe pattern. The 0308BLKTS offers a beefy 3.7-inch tiger stripe blade with premium CPM 20CV blade steel. The handle features black G10 on the front scale with a titanium back. Both the front and back are heavily 3D machined for an ultra-secure grip. The .25-inch solid pivot features a custom nut that enables it to be adjusted in the field with a 1/2-inch wrench. The pocketclip hole pattern is compatible with many after-market clips.
-
Frame Lock Knife Carbon Fiber 3.5″ Stonewash CPM 20CVTI Drop Point 0707
$444.00Zero Tolerance Knives
Finding the perfect balance between big and small, the 0707 offers something for everyone with its premium looks and cutting performance. Its sleek profile is comfortable in the hand, while also keeping a low profile in the pocket. Yet its 3.5-inch blade offers a substantial edge for most cutting tasks. Plus, for a first in the Zero Tolerance lineup, users can access the blade with ZT’s Tuned Detent System (TDS™), which allows the knife to be opened even with pressure on the lockbar. A reversible extra-deep-carry pocket clip, carbon fiber handle scales, and CPM 20CV blade steel round out this feature-packed ZT innovation.
Features:
- Made in the USA
- Tuned Detent System (TDS™) enables us to fine-tune the detent so it’s not too heavy, not too light and provides consistent opening even when pressure is applied to the lockbar
- Drop point blade features a full width flat grind for precision slicing ability
- CPM 20CV blade steel offers exceptional hardness, wear resistance, edge retention; stonewashed finish helps hide use scratches
- Extra-deep-carry pocket clip provides a convenient, low profile carry
- Partially machined carbon fiber handle looks sleek and feels comfortable in-hand.
-
Galyean Flipper Knife 1.8″ CPM-20CV Stonewashed Blade, Bronze Titanium Handle, Frame Lock 0022TIBRZ
$349.00Zero Tolerance Knives
Designed by Tim Galyean and precision built by Zero Tolerance, the 0022 practically disappears in your pocket—until it’s needed. Of course, the 0022 is adept at a full range of cutting tasks around home and office. Yet we’re sure that some of you will also find it a useful accompaniment to deep thought, flipping it open and closed, again and again.
The 0022’s under-two-inch blade is made of CPM-20CV stainless steel for superior hardness and corrosion resistance, as well as toughness, wear resistance, and excellent edge retention. The titanium handles feature a bronze anodized finish. And even though it’s small, the 0022 is designed for hand comfort with deep finger contours to ensure a good grip.
For eye-catching looks, ZT added a decorative pivot with a blue-anodized pivot ring and matching tube spacers, which make an attractive contrast with the dark carbon fiber. ZT’s smooth KVT ball-bearing opening makes it quick, easy—and somewhat addictive—to open and close the 0022. Whether as an office-appropriate EDC or even as a backup knife, the compact 0022 packs an outsized punch of performance and quality.
-
Hinderer Slicer Flipper Knife 3.5″ CPM-20CV Satin/Stonewashed Plain Blade, Carbon Fiber with Titanium Back Handle, Frame Lock 0562CF
$450.00The Zero Tolerance 0562CF is a solid, tactical folding knife designed by knifemaker Rick Hinderer. The 0562CF is the dressed-up version of the popular 0562. With a carbon fiber front scale and Rick’s “slicer” grind, this top performer is ready to take on your next task. The blade has a sweet slicing edge, but also supports the blade tip to make it excellent for piercing, too. The 0562CF’s handle has a carbon fiber front scale and stonewashed titanium back. For secure lock up during use, ZT uses a frame lock with hardened steel lockbar inserts and lockbar stabilization.
-
Hinderer Slicer Frame Lock Flipper Knife 3.5″ CPM-MagnaCut Stonewashed Drop Point Blade, Green Canvas Micarta with Titanium Back Handle 0562MIC
$406.00The popular 0562 from Zero Tolerance and Rick Hinderer just got fitted with a titanium handle.
In addition to the titanium handle, the 0562MIC offers a premium CPM-Magnacut steel blade with Rick’s exclusive Hinderer “slicer” grind. This blade grind gives you both slicing efficiency and a tough point. The Magnacut powdered steel blade provides high wear resistance and corrosion resistance—enabling a hair-popping edge that lasts for a long time, even under hard use. For good looks, ZT gives the blade a stonewashed finish on the flats and a machine satin finish on the grinds.
The knife opens with a flipper and moves out of the handle on ZT’s smooth KVT ball-bearing opening system. KVT’s “caged” ball bearings surround the pivot and make opening the knife nearly frictionless; just pull back on the flipper and add a roll of the wrist and the 0562MIC is ready for action. For secure lock up during use, ZT uses a frame lock with hardened steel lockbar inserts and lockbar stabilization so the lock won’t overextend. Machined pockets on the inside of the front handle scale relieve weight and make the big 0526MIC easy to carry.
The unique pocket clip, which attaches to the inside of the handle rather than the outside, is reversible (left/right) and enables extra-deep carry in the pocket. ZT uses matte black hardware to accent the steel-and-titanium look, which makes the 0562MIC exceptionally handsome.
-
Jens Anso Double Detent Slipjoint Pocket Knife 2.6″ CPM-20CV Sheepsfoot Blade, Carbon Fiber Handle 0230
$316.00Zero Tolerance Knives
Minimalist design meet maximum performance in the new 0230 from ZT and Danish designer Jens Ansø. This slip-joint knife features a double detent system: two steel detent balls, one on each side of the blade. The hold the blade safely closed for carrying. Then, for controlled open and close, the 0230 also has a half-open position. An extra-deep-carry clip provides an easy way of carrying the knife in your pocket. Everything combines to make this a simple, yet extraordinary pocketknife.
- Made in the USA
- Double detent system: two steel detent balls, one on each side of the blade for safe carrying, controlled open/close
- Blue anodized aluminum backspacer with integrated lanyard attachment
- CPM 20CV blade steel offers exceptional hardness, wear resistance, edge retention; stonewashed finish helps hide use scratches
- Extra-deep-carry pocket clip provides a convenient, low profile carry
- Ultralightweight carbon fiber handle.
PLEASE NOTE THAT OLDER MODELS DO NOT INCLUDE A POCKET CLIP. CURRENT PRODUCTION MODELS ARE BUILT WITH A REVERSIBLE EXTRA-DEEP CARRY POCKET CLIP.
-
Limited Edition Frame Lock Flipper Knife 3.75″ M390 Two-Tone Satin/Stonewashed Clip Point Blade, Carbon Fiber and Titanium Handle 0308CF
$588.00Zero Tolerance Knives
Heavy duty cutting and stylish design join together with the 0308CF. This Factory Special Series folder offers a beefy 3.7-inch blade for hard-use tasks. Confidently take advantage of M390 blade steel, an ultra-premium material with high edge retention, hardness, and wear resistance. Its stunning two-tone finish helps the blade stand out, too. The handle features solid carbon fiber on the front scale with a Working finish titanium back. Both front and back are heavily 3D machined for a secure grip. The 7/32-inch solid pivot includes a custom nut that can be adjusted in the field with a 1/2-inch wrench. The pocketclip hole pattern is compatible with many after-market clips. Available in limited quantities, don’t miss the popular 0308, now with carbon fiber and M390.
- Made in the USA; Factory Special Series
- Solid pivot has custom nut; enables in-the-field adjustment with 1/2-inch wrench
- M390 blade steel offers exceptional hardness, wear resistance, edge retention; two-tone blade finish with stonewashed flats and satin grinds
- KVT ball-bearing opening, flipper; titanium framelock with hardened steel lockbar insert secures blade safely open during use
- Compatible with variety of after-market pocketclips.
-
Rick Hinderer Flipper Knife 3.5″ CPM-20CV Working Finish Blade and Titanium Handle with Glow-in-the-Dark Carbon Fiber Overlays, Frame Lock 0393GLCF
$524.00Zero Tolerance Knives
The 0393 was a hit when it was introduced. Now ZT is introducing this special version with a hard-use “working” finish and a glow-in-the-dark carbon fiber handle overlay.
The 0393GLCF’s handle is built of strong, lightweight titanium with Rick’s “working” finish—a no-nonsense finish that hides scuffs and scratches even better than stonewash. By day, the contoured, carbon fiber overlay gives the 0393GLCF a touch of style. But by night, the 0393GLCF reveals another side of its character. Take it into a darkened room and you’ll see a soft, green glow coming from the carbon fiber. This unique carbon fiber makes it easy to find your knife in the dark—and definitely makes it a conversation piece.
The 0393GLCF features a harpoon-style version of Rick Hinderer’s “spanto” blade in CPM-20CV. The blade shape offers maximum cutting power with a sturdy tip for piercing. The 20CV steel provides superior hardness and corrosion resistance, along with toughness, wear resistance, and excellent edge retention.
For fast and easy opening, the 0393GLCF’s blade moves smoothly out of the handle with the KVT ball-bearing system and a handy flipper. It comes with a reversible titanium pocket clip, and it will also accept a selection of Hinderer custom hardware so that you can truly make it your own.
-
Sinkevich Flipper Knife 3.75″ CPM-20CV Two-Tone Blade, Red Carbon Fiber and Titanium Handle, Frame Lock 0462
$476.00Zero Tolerance Knives
The popular 0460 now has a bigger, bolder brother.
This super-sized version of the Zero Tolerance 0460, designed by Dmitry Sinkevich, features a larger, 3.75-inch upswept blade of CPM 20CV. CPM 20CV delivers superior hardness and corrosion resistance, along with toughness, wear resistance, and excellent edge retention.
The new ZT 0462 also features a colored carbon fiber front scale with a deep-red weave of color. The back is titanium with an attractive stonewashed finish. The 0462 locks up securely thanks to a frame lock with hardened steel lockbar insert. Like many ZTs, the 0462 opens quickly and easily with the KVT ball-bearing system and a built-in flipper.
And while the first thing that will catch your notice about this big knife is that sweeping blade and handle curve, we urge you to look closer. ZT has added details to the interior of the 0462’s handle that are just waiting to be discovered.
-
Sinkevich Flipper Knife 3.25″ S35VN Satin Blade, Titanium Handle, Frame Lock 0450
$360.00Zero Tolerance Knives
The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a very Limited Edition knife.
So ZT is doing something about that with the new 0450. While based on the original’s streamlined form and high-performance function, this new and more compact version will be much more readily available. With its 3.25-inch blade and lightweight-yet-stronger-than-steel titanium handles, the 0450 has a sleek and sophisticated look that, we think, makes it a perfect EDC.
ZT built it with an S35VN stainless blade that sharpens to a razor edge, holds it well, and can be resharpened easily. The knife opens smoothly and easily with the KVT ball-bearing opening system and built-in flipper. A titanium frame lock with hardened steel lockbar insert ensures solid lock up. Polished pivot hardware just adds to the 0450’s refined good looks.
-
Sinkevich Flipper Knife 4.1″ S35VN BlackWashed Blade, Red Carbon Fiber and BlackWashed Titanium Handle, Frame Lock 0452RDBW
$420.00Zero Tolerance Knives
The original Zero Tolerance 0454 was an award-winning collaboration between ZT and custom knife designer Dmitry Sinkevich. But it was also a VERY Limited Edition knife.
To make this amazing knife more readily available, ZT created a version based on the original’s streamlined form and high-performance function. From office to outdoors, the 0452RDBW is ready to go wherever you’re ready to take it.
The 0452RDBW has a CPM S35VN stainless steel blade with a flipper opener, and the KVT ball-bearing pivot produces reliable, buttery smooth, and quick one-handed deployment. The carbon fiber handle is an ergonomic dream come true, and it’s also tough, dependable, and will hold up under pressure. The design is truly beautiful in action as well as style. For a slim, elegant pocket knife, get the ZT 0452.
S35VN sharpens to a razor edge, holds it, and can be resharpened easily.
-
TDS Tuned Detent System Flipper Knife 3.4″ CPM-20CV Modified Sheepsfoot Blade, Carbon Fiber Handle, Frame Lock 2TN 0762
$556.00Zero Tolerance Knives
Packed with innovation, the 0762 delivers a top-of-the-line ZT experience. Its modified sheepsfoot blade and carbon fiber handle scales offer the ultimate medium-size ZT carry. Open the 0762 reliably with the ZT Tuned Detent System (TDS), allowing the blade to deploy even with pressure on the lockbar. The ZT Sub-Frame Lock secures the blade into place without sacrificing the lightweight benefit of carbon fiber. A two-tone CPM-20CV blade is pleasing to the eye and just as useful during work tasks. The 0762 stands out with an array of aesthetic details, including matching blue-anodized hardware and sleek handle windows. All of these premium features create a Zero Tolerance showpiece slicer.
-
Tiger Stripe Assisted Flipper Knife 3.25″ S30V Plain Blade, Black G10 Handle, Liner Lock 0350TS
$292.00Zero Tolerance Knives
In response to customer requests, ZT is proud to introduce the 0350. It’s slightly smaller and slightly lighter than the 0300—10% to be precise—but just as aggressive. The 0350 is fully equipped with SpeedSafe® for one-handed assisted opening. Even in combat gloves, you can easily deploy the blade using the large, ambidextrous thumb stud or blade protrusion. The blade is S30V stainless steel with Tungsten DLC (Diamond Like Carbon) coating. S30V provides extreme durability, while the black Tungsten DLC is non-reflective, enhances hardness, and reduces friction drag. Textured, matte-black G10 scales provide a secure grip. Includes a quad mounting system for tip-up, tip-down, left- or right-handed clip carry.