Flipper Knife 3.2″ CPM-MagnaCut Stonewashed Drop Point Blade, Blue/Black Carbon Fiber and Titanium Handle, Frame Lock 0545BLUCF
$445.00
Zero Tolerance Knives
Carry the 0545 in stylish blue, available in limited quantities at authorized dealers. Its slim profile features a blue carbon fiber front handle for a comfortable and light carry. But the manual KVT folder is also sized appropriately for serious cutting tasks. Even better, the two-tone blade measures at an extra slicey 0.09 inches and uses a full-width flat grind. Its CPM MagnaCut blade steel is balanced with premium edge retention, toughness, and corrosion resistance. This ZT Original is a clean design with no visible pocket clip screws. Yet the minimal deep-carry clip is reversible for left or right carry. As a bonus, the pivot screw is anodized with a matching blue finish. Grab one while they last, because when they sell out at dealers, they’re gone.
- Made in the USA; Factory Special Series
- Premium CPM MagnaCut powdered metallurgy blade steel excels in edge retention, corrosion resistance, wear resistance, and toughness; two-tone blade finish with stonewashed flats and satin grinds
- Blade opens easily and smoothly with KVT ball-bearing system with washers and flipper
- Blue carbon fiber front scale with working finish titanium back; handle finger pocket keeps pressure off frame lock, which helps result in consistent and smooth opening each time
- Reversible extra-deep-carry pocket clip provides a convenient, low profile carry; blue-anodized pivot screw.
In stock
| Overall Length | 7.5 in. (19.1 cm) |
| Blade Length | 3.2 in. (8.1 cm) |
| Blade Thickness | 0.09 in. (2.3 mm) |
| Cutting Edge | Plain |
| Blade Style | Clip Point |
| Blade Steel | CPM MagnaCut; 60~63 HRC |
| Blade Finish | Stonewashed finish Flats, Satin finish Grinds |
| Handle Length | 4.3 in. (10.9 cm) |
| Handle Thickness | 0.375 in. (9.5 mm) |
| Handle Material | Blue & Gray Carbon Fiber front, Titanium back |
| Weight | 2 oz. (57 g) |
| Product Type | Folding Knife |
| Brand | Zero Tolerance |
| Model # | 0545BLUCF |
| Country of origin | USA |
| Open mechanism | Manual KVT ball bearings and washers |
| Opening Method | Flipper |
| Lock Type | Titanium Frame Lock, Hardened Steel Lockbar Insert |
| Pocket Clip | Reversible Extra-Deep-Carry (Right/Left, Tip-Up) |
Related products
-
Bugout AXIS Folding Knife 3.24″ S30V Smoked Gray Plain Blade, Ranger Green Grivory Handle 535GRY-1
$270.00 Add to cartBugout AXIS Folding Knife 3.24″ S30V Smoked Gray Plain Blade, Ranger Green Grivory Handle 535GRY-1
Benchmade Knives
Subtle, yet capable, the latest version of the Bugout® was developed to be easily carried anywhere without drawing attention to itself. Ranger green handles and a smoked gray, chromium nitride coated blade blend into nearly any environment. Whether you’re in the city or mountains, this lightweight folder will be ready when you are.
IMPORTANT NOTICE! Due to CBSA restrictions (Customs Notice 18-01), Benchmade knives may have broken seals due to inspection at the Canadian border.
$270.00 -
Grizzly Ridge AXIS Lock Hunting Knife Plain Edge Satin Blade with Warm Gray/Orange Handle 15061
$208.00 Add to cartGrizzly Ridge AXIS Lock Hunting Knife Plain Edge Satin Blade with Warm Gray/Orange Handle 15061
Benchmade Knives
Based on the highly regarded Grizzly Creek, the Grizzly Ridge™ brings the comfort and sure grip of a dual durometer handle, a blade designed for all-around hunting utility, and unique orange accents.
$208.00 -
Fraxion Flipper Knife 2.75″ BlackWashed Clip Point Blade, Black G10 Handle with Carbon Fiber Overlays 1160
$74.00 Add to cartFraxion Flipper Knife 2.75″ BlackWashed Clip Point Blade, Black G10 Handle with Carbon Fiber Overlays 1160
Kershaw Fraxion 1160. This contemporary and stylish knife has been designed by Danish custom knife and toolmaker, Jens Anso. He has designed the handle to have G-10 scales and carbon fiber overlays. This is a fantastic way to enhance beauty and make this knife lightweight- a fraxion less than most knives this size. The black wash finish on this 2.75 inch blade will help keep everday scratches to a minimum. The steel is made with 8CR13MoV with a black-oxide BlackWash finish. This does open the good old manual style- KVT manual opening- but there is a small flipper on the back as well. The Fraxion will be one knife you can not be without. Pocket clip can be changed from left to right. Even though this knife is a manual folder, it opens just as fast as an assisted opener thanks to the flipper on the back of the handle. In fact one of our staff mistaken this knife for an assisted opener when unpacking it for the first time!
$74.00 -
Blur Assisted Folding Knife 3.4″ Stonewash Plain Blade, Blue Aluminum Handle, Liner Lock 1670NBSW
$199.00 Add to cartBlur Assisted Folding Knife 3.4″ Stonewash Plain Blade, Blue Aluminum Handle, Liner Lock 1670NBSW
Kershaw Knives
Like all Blurs, the 1670NBSW is equipped with a big, slightly recurved blade that’s ideal for multitasking. The blade shape offers both excellent slicing and piercing capabilities. High-performance Sandvik 14C28N stainless steel provides the Blur’s blade with corrosion resistance and excellent edge-holding ability. The stonewashed blade finish gives the surface a desirable roughened or scuffed look that helps hide scratches and fingerprints.
The handle is built of durable 6061-T6 anodized aluminum, which is sometimes described as “aircraft aluminum” since it is a common material used for aircraft fittings. It’s lightweight, extremely durable, and anodizes well so Kershaw can create colored handles that are scratch resistant and extra tough. Trac-Tec grip-tape inserts provide an extra-secure grip. The Blur’s inset liner lock ensures secure blade lock up during use.
For easy one-handed opening, the Blur is equipped with SpeedSafe® assisted opening. Just push on the built-in thumb stud. The reversible pocketclip lets you carry tip-up or tip-down comfortably.
$199.00