Universal Mount for Lansky Sharpening Systems LM009
$22.00
Lansky
The versatile Universal Mount is designed to optimize your Lansky® Sharpening System. Our Multi-Angle Clamp provides the counterpart to rest on the post of this universal mount. This allows for a more hands-free sharpening experience.
Key Features:
- Lightweight Aircraft Grade Aluminum Construction
- 2 Piece design for easy stow-away in your Lansky® case
- 4 screw holes for permanent surface mounting.
Instructions
USING YOUR universal mount
Step 1 – Assembly: Thread the pedestal post to the base (Both pieces included)
Step 2 – Prepare clamp and knife: Be sure to mount the knife blade securely in the Multi-Angle Clamp.
Step 3 – Final Assembly: Place clamp so the center hole fits over the top of the mount.
Table-top mounting: Use 4 small screws and the pre-drilled holes on the base to mount the pedestal to a bench-top, a small board just for itself, etc.
In stock
Additional information
| Weight | 0.125 kg |
|---|---|
| Dimensions | 24 × 13 × 3 cm |
Related products
-
Counter Assault Belt Holster – fits CAC-12 H-1218
$16.00 Add to cartCounter Assault Belt Holster – fits CAC-12 H-1218
Great for hiking and backpacking. Attaches easily to belts and packs. A most have for and of your outdoor adventures.
Features
- Sturdy nylon construction
- Package Dimensions: 0.8 H x 6.25 L x 3.0 W (in centimeters)
- Touch closure
- Country of Origin : United States.
$16.00 -
Aurora Firestarter Black Magnesium 440C AFS440CBPP
$29.00 Add to cartAurora Firestarter Black Magnesium 440C AFS440CBPP
Created and manufactured by Solo Scientific Inc. in the USA to be used to start your campfires (also a must to be prepared for emergencies). The goal was to design and manufacture the best all-around survival fire starter in the world and we have absolutely done it! AEROSPACE QUALITY, the Aurora Fire Starter™ (US Patent Numbers. 8202085, 8186995) is a true survival tool and will work in any environment that will support life! Works wet or dry!
Knurled for sure grip in wet weather, lightweight, designed for outdoor adventurers, and pilots who like to be prepared, our Aurora Fire Starter has even climbed Mount Everest! Our Aurora Fire Starter will start a lifetime of campfires for most users. Two models are now available both equipped with a built-in guided striking blade and ferrocerium flint steel rod with magnesium within its composition – yielding sparks as hot as 5000 degrees F. Your color choice of either silver, black, or rescue red for both models. This model comes with our great Fully Hardened Stainless Steel Striking Blade installed that can be flipped over or sharpened if ever dulled.
To start a fire using our Aurora Fire Starter:
- Place your fire starting material on the ground (plain cotton balls, dryer lint, toilet paper, char cloth, birch bark, milk weed fluff, cotton wood fluff, burdock, or fine dry grass work great but any fine dry tinder usually found in the wild can be used).
- Open your Aurora Fire Starter.
- Scrape the composite flint steel rod (ferrocerium w/magnesium within its composition) with the built-in guided Stainless Striking Blade (Note: for first use it may be necessary to scrape off protective coating on rod first with striking blade) while aiming the hot burning sparks at your tinder and you have FIRE!
The Aurora Fire Starter is rugged, and is designed for survival. It uses a large 1/4″ diameter (.635cm) composite flint steel rod that has magnesium built into it. The built-in Striking Blade could be a lifesaver! You can wear the lightweight Aurora Fire Starter on your key ring or around your neck on a lanyard and if you are ever separated from your pack or knife you will still have everything you need to start a fire. The built-in Striking Blade takes off enough material to start a fire but will not cause excessive wear, can be flipped over to reveal a fresh striking surface (Note: the Stainless striking blades will yield thousands of strikes before needing to be flipped), or be sharpened if dulled. The built-in Striking Blade is part of the unit and will not get caught on equipment, break off, or rattle while in combat, or hunting – like other fire starters that have a blade hanging from a string. The Aurora Fire Starter is designed to function wet or dry, is machined from solid light- weight aircraft aluminum (NO PLASTIC!), is knurled for grip, and will not break when you need it most.
The Aurora Fire Starter has an overall length of 3.6″ (9.14cm) a diameter of .625″ (1.59cm), weighs 1/10lb.(1.6 oz or 45g), has an o-ring seal to prevent the housing from unscrewing and provide protection from corrosion in salt water environments. It is designed to last a life time and provide you with fire when the emergency situation occurs. The Aurora Fire Starter comes complete with detailed instructions and several pieces of fire starting material. Includes 2 Cotton Balls. Made in the USA.
$29.00 -
Herald Razor Strop 19 3/8″ Overall Length LD888001
$49.00 Add to cartHerald Razor Strop 19 3/8″ Overall Length LD888001
Razor Strop – Suitable for solid or tube strop paste. Swivel and handle nickel plated.
Overall length approximately 19 3/8″. Usable length approximately 13″. Width 1 3/4″.
Made in Germany.
$49.00 -
7 Rescue Hook Strap Cutter 440C Steel 4.3″ Overall, Black Nylon Sheath 7 BLKWSN
$47.00 Add to cart7 Rescue Hook Strap Cutter 440C Steel 4.3″ Overall, Black Nylon Sheath 7 BLKWSN
Benchmade
The Benchmade Model 7 Hook cuts quickly and reliably in an emergency situation. All of our safety cutters are made along side our knives in the U.S.A. The larger handle of the 7 hook design works well with gloved hands and the coated handle allows for better grip. MOLLE® compatible.
$47.00