Knifesmith Multi-Bit Driver 50141
$96.00
The Benchmade Knifesmith Multi-Bit Driver is a versatile tool for any toolbox. The ergonomic driver handle was specifically designed for in-hand comfort. Featuring 12 precision bit tips, allowing you to do numerous tasks from replacing pocket clips to tightening screws. Keep your knife in top form with our driver.
Bits:
- T5 Torx
- T6 Torx
- T8 Torx
- T10 Torx
- 0.050″ Hex
- 1/16 Hex
- 2mm Slotted
- 4mm Slotted
- P0 Phillips
- P1 Phillips
- P2 Phillips
- AWL.
In stock
| Overall Length | 6.10 in. (15.49 cm) |
| Handle Length | 4.25 in. (10.80 cm) |
| Handle Width | 0.95 in. (2.41 cm) |
| Handle Material | Rubber |
| Shaft Length | 1.85 in. (4.69 cm) |
| Bit Length | 1.10 in. (2.79 cm) |
| # of Tools: | 12 |
| Product Type | Multi-Bit Driver |
| Brand | Benchmade |
| Model | Knifesmith Multi-Bit Driver |
| Model # | 50141 |
| Country of origin | USA |
Related products
-
Mini Leatherneck Tanto Fixed Blade 6.75″ Overall, Kray-Ex Handle, Secure-Ex Sheath 39LSAA
$39.00 Add to cartMini Leatherneck Tanto Fixed Blade 6.75″ Overall, Kray-Ex Handle, Secure-Ex Sheath 39LSAA
Cold Steel Knives
It is not the size of the dog in the fight that matters as much as the size of the fight in the dog! The Mini Leatherneck Series embodies this saying completely. Made from 8Cr13MoV steel and offered in three blade styles, each features a stainless steel guard with broad quillons to protect your fingers. The grip is made from Kray-Ex™ and is de-signed to be reminiscent of our larger Leatherneck models.
These knives come with a tough, sturdy Secure-Ex™ sheath that will accommodate a bead lan-yard or a Cold Steel® C-Clip. Best of all they are economically priced.
$39.00 -
Delica 4 Folding Knife 2-7/8″ VG10 Satin Plain Blade, Stainless Steel Handle, Lockback C11P
$164.00 Add to cartDelica 4 Folding Knife 2-7/8″ VG10 Satin Plain Blade, Stainless Steel Handle, Lockback C11P
Spyderco Knives
The stainless steel Delica 4 fills your palm with a handful of steel yet doesn’t seem weighty or unwieldy. Knife Knuts who prefer something heavier and stouter seem to gravitate to steel handled knives. Since the handle surface is flat and smooth it offers an ideal palette for engraving or personalizing your knife.
As part of Spyderco’s CQI (Constant Quality Improvement) philosophy the C11SS now offers improved ergonomics added to the blade’s spine is slip resistant jimping, a larger thumb hole, a stronger thicker tip and a new 4-way clip design (R/L reversible and Tip-up/Tip-down). The saber-ground blade is VG-10 and is available in a PlainEdge, SpyderEdge or CombinationEdge™.
$164.00 -
Spetsnaz Trench Shovel 30″ Overall, No Sheath 92SFX
$58.00 Add to cartSpetsnaz Trench Shovel 30″ Overall, No Sheath 92SFX
Cold Steel
It has a stout hardwood handle, a broad flat steel blade and 3 sharp edges. Its ideally suited for digging foxholes and bunkers, to chop branches, build shelters, act as an improvised paddle, and even as a last-resort weapon of defense! Its even an excellent alternative to a Tomahawk for sport and recreational throwing! Our new larger variation, called the Spetsnaz Trench Shovel, has all the winning features of the Special Forces model, with the added benefit of enhanced size. It is 50% longer in length, and has a slightly larger shovel head.
$58.00 -
Barge Folding Knife 2.6″ Stonewashed Sheepsfoot Blade, Zytel Handle , Frame Lock 1945X
$59.00 Add to cartBarge Folding Knife 2.6″ Stonewashed Sheepsfoot Blade, Zytel Handle , Frame Lock 1945X
Kershaw Knives
You know you do it. And you know you shouldn’t. You should never use the blade of your knife—especially the blade of your folding knife—as a prybar.
However, if you’re pry-prone anyway, Kershaw now has the right knife for you. The Barge features an integral prybar that extends from the backspacer of the knife. Now there’s no need to even think about wrenching on something with your blade. Finally, you’ve got the right tool for the job—an actual prybar built into the back of the knife.
That said, the Barge’s other end is pretty handy, too. The shorter blade is a Sheepsfoot with a fairly straight edge, which is a great shape for a general utility knife. That edge is extra handy for when you might need to bear down on something you’re cutting. The stonewashed finish hides scratches easily.
The handle has a faux G-10 textured front scale for grip and a stonewashed steel back with sturdy frame lock. The pocket clip is designed for tip-down carry and is left/right reversible.
Next time you need to pry, you know what to do. Grab the Barge.
$59.00