Super Tool 300 Multipurpose Pliers with a Molle Holster 831149

Related products

• 

  Select Fire Multi-Function Folding Knife 3.375″ Bead Blast Plain Blade, GRN Handle, Liner Lock 1920

  $75.00 Add to cart

  Select Fire Multi-Function Folding Knife 3.375″ Bead Blast Plain Blade, GRN Handle, Liner Lock 1920

  The Kershaw 1920 Select Fire Folding Knife w/ Multi-Tool was built to be a knife-focused multi-tool and built around a manual opening knife blade. For strength and edge-holding capability, the Select Fire’s blade is made of 8Cr13MoV stainless steel and bead-blasted for an easy care, matte look. Designed by Grant and Gavin Hawk, the Select Fire is also a handy multi-tool. There’s a 4-piece bit set, plus the bit driver. The bits, two flathead and two crosshead, are in on-board carriers that swings out to let you choose your bit, then swings back to snap into place. Black liners give it a sleek, finished look. The contoured glass-filled nylon handle is equally comfortable whether you’re using the blade or the bits. The Select Fire makes a great addition to every tool and truck box.

  Tools

  1. 1/4-in. hex drive,
  2. 2 flathead,
  3. 2 crosshead bits,
  4. Ruler on bit drive shaft.

  SKU: 1920 Category: Multi Tools

  $75.00
• 

  S31 Criterion Collection Keychain Multi Tool Pocket Knife Black G10 Handle S31-B

  $42.00 Add to cart

  S31 Criterion Collection Keychain Multi Tool Pocket Knife Black G10 Handle S31-B

  Ruike Knives

  Compact and convenient for every day carry. Equipped with a stainless steel key ring and available multifunction tools, the S series is great for those every day tasks.

  6 Tools:

  1. Blade
  2. Key ring
  3. Scissors
  4. Bottle opener
  5. Belt cutter
  6. Small screwdriver 4 mm.

  SKU: S31-B Categories: Folding Knives, Multi Tools

  $42.00
• 

  Eat’N Tool (Black), Spoon, Fork, Bottle Opener, Screwdriver/Pry Tip, Wrenches, Carabiner 9100K

  $13.00 Add to cart

  Eat’N Tool (Black), Spoon, Fork, Bottle Opener, Screwdriver/Pry Tip, Wrenches, Carabiner 9100K

  Columbia River

  Crafted by Hand. So You Don’t Have to Eat with Yours.

  Spoon? Check. Bottle Opener? Check. With this unique outdoor multi-tool, you’ll be checking off a lot of things without having to dig too far into your pack.

  Our Eat’NTool® is the brainchild of designer Liong Mah of Palm Bay, FL. At first glance it looks like the familiar spoon/fork “spork” combination, but Liong has used his ingenuity and computer-aided design skills to create a lightweight, high-tech outdoor tool.

  Yes, there is an ergonomic spoon, and a short-tuned fork. But in addition, there’s a handy bottle opener on one side for your beer that will go with dinner. Then, if you’re in a bind, the right side of the handle is ground to provide an emergency screwdriver blade and will also work as a pry for opening canisters. Finally three metric wrench reliefs (10 mm, 8 mm, 6 mm) are useful for emergency repairs. See there, looks can be deceiving.

  A large central hole is not only designed for finger gripping, but it also keeps the Eat’N Tool® weight down. At just 1.5 ounces (43 g) this multi-tool doesn’t just look good on paper. In its attractive chrome color it looks good to the eye too.

  This unique tool also features a non-load bearing carabiner for easy snap-on carry on D-rings or loops on clothing and backpacks.

  Reach for the Eat’N Tool® and you’ll never again find yourself saying “Darn it, where’d I put the…”

  Tools

  • High-tech Spoon,
  • Fork,
  • Bottle Opener,
  • Screwdriver/Pry Tip,
  • Metric Wrench with a Carry Carabiner.

  SKU: 9100K Categories: Kitchen Accessories, Multi Tools

  $13.00
• 

  Kickflip Keychain Skateboard Multi-Tool 3.25″ Overall SK8TOOLX

  $30.00 Add to cart

  Kickflip Keychain Skateboard Multi-Tool 3.25″ Overall SK8TOOLX

  Kershaw

  From champion skateboarder Chris Cole and Kershaw comes the Kickflip, the skateboard tool that makes adjusting your skateboard for its best ride easy. This Chris Cole signature product gives you the key tools you need to keep bolts adjusted properly in a right-sized tool that fits nicely in your pocket. Chris worked with the Kershaw design team to create the ideal skateboarding tool—not too big, not too small, and with all the tools you’ll need.

  The axel nut pipe wrench lets you adjust the wheels. The kingpin pipe wrench makes tightening or loosening the bolt for greater stability or greater turning easy. There’s a small nuts pipe wrench for mounting the base plate to the skateboard. Use it with the tool’s hex key wrench or phillips screwdriver (depending on your hardware configuration) to tighten the bolts into place. The Kickflip comes in two pieces, held together by magnets, enabling a skateboarder to use both halves of the tool simultaneously to effectively tighten the truck bolts. “You tighten the bolts quite often,” says Chris. “You have to keep your trucks secure. Over time, it vibrates and loosens up the hex bolts.” Slip the Kickflip in your pocket and you’ll have everything you need to keep your skateboard exactly how you like it.

  Tools

  1. Kingpin pipe wrench
  2. Axle nuts pipe wrench
  3. Small nuts pipe wrench
  4. Hex key wrench
  5. Phillips screwdriver.

  SKU: SKS8TOOLX Category: Multi Tools Tag: Discontinued Items

  $30.00